| PART |
Description |
Maker |
| FP206 |
Push-Pull Circuit Applications
|
SANYO[Sanyo Semicon Device]
|
| MCH6536 MCH653608 |
Push-Pull Circuit Applications
|
Sanyo Semicon Device
|
| MCH6542 |
Push-Pull Circuit Applications
|
Sanyo Semicon Device
|
| MCH6541 EN8949 |
PNP / NPN Epitaxial Planar Silicon Transistors Push-Pull Circuit Applications
|
Sanyo Semicon Device
|
| NTE1749 |
Integrated Circuit Push-Pull Four Channel Driver
|
NTE[NTE Electronics]
|
| UM2002U8 |
Bidirectional voltage level translator for open-drain and push-pull applications
|
Union Semiconductor, Inc.
|
| ADM6316CY29ARJ-RL7 ADM6316CY46ARJ-RL7 ADM6316DZ26A |
Supervisory Circuit with Watchdog, Manual Reset and Active-Low, Push-Pull Reset Output
Supervisory Circuit with Watchdog and Dual Active-Low/Active-High Push-Pull Reset Outputs
Supervisory Circuit with Manual Reset and Dual Active-Low/Active-High, Push-Pull Reset Outputs
Supervisory Circuit with Watchdog, Manual Reset and Active-Low, Open-Drain Reset Output
Supervisory Circuit with Manual Reset and Dual Active-Low Open-Drain/Active-High Push-Pull Reset Outputs
|
Analog Devices
|
| MB3759 MB3759C MB3759P MB3759PF |
Pulse-Width-Modulation Control Circuit
Switching Regulator Controller (Switchable between push-pull and single-end functions)
|
Fujitsu Microelectronics
FUJITSU[Fujitsu Media Devices Limited]
|
| L293C 1329 |
PUSH-PULL FOUR CHANNEL/DUAL H-BRIDGE DRIVER
PUSH-BRIDGE DRIVER PUSH-PULL FOUR CHANNEL/DUAL
From old datasheet system
|
ST Microelectronics
STMICROELECTRONICS[STMicroelectronics]
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| CGY887B CGY887B_1 CGY887B-2015 |
860 MHz/ 27.8 dB gain push-pull amplifier
From old datasheet system
860 MHz, 27.8 dB gain push-pull amplifier
|
Quanzhou Jinmei Electronic ...
NXP Semiconductors
Philips Semiconductors
|
| ADM809-5LARTZ-RL7 ADM809-5LAKSZ-RL7 ADM809-5SAKS-R |
Microprocessor Supervisory Circuit in 3-Lead SOT-23 & SC70, Active-Low Push-Pull Output; Package: SC70; No of Pins: 3; Temperature Range: Industrial 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3
|
Analog Devices, Inc.
ANALOG DEVICES INC
|
